{"id":14750,"date":"2022-12-27T10:21:37","date_gmt":"2022-12-27T15:21:37","guid":{"rendered":"https:\/\/www.megavaper.com\/?post_type=product&p=14750"},"modified":"2024-06-10T02:31:27","modified_gmt":"2024-06-10T07:31:27","slug":"aspire-nautilus-3-tank-4ml","status":"publish","type":"product","link":"https:\/\/www.megavaper.com\/product\/aspire-nautilus-3-tank-4ml\/","title":{"rendered":"Aspire Nautilus 3 Tank | 4mL"},"content":{"rendered":"
The Aspire Nautilus 3 Sub-Ohm Tank is compatible with all Nautilus Series Coils and has a 4mL e-juice capacity. It also features an e-liquid shut-off valve to stop e-juice from leaking out of the tank. The Aspire sub-ohm tank has exceptional resistance to drops and minor impacts because to its sturdy stainless steel construction.<\/p>\n
The Nautilus 3 can contain up to 4mL of eJuice and may be replenished from the top. A CRC locking mechanism is included to prevent children from accessing the tank. An MTL airflow control ring allows vapers to adjust the perfect airflow that enhances taste and airflow rate.<\/p>\n
The Nautilus 3 tank is the newest version of Aspire’s most frequently used and wildly successful tank. With its simple slide top fill port, wide span of air flow settings, and newly added push-to-fit coil system, they have improved this tank and created a true winner. This system is not only simple but also completely mess-free because the coil head can be changed while the tank is still filled with liquid. The Nautilus 3 is compatible with a variety of Nautilus heads, which are by far the most well-known MTL heads ever for their amazing flavor and vaping experience. The 0.7ohm mesh coil and a 3mm airflow setting on the Nautilus 3 allow for direct lung inhalation.<\/p>\n
The top cap is simply pushed down to reveal the fill port, which makes it easy to fill the Nautilus 3. With the AFC ring, air flow may be readily changed from 0.8mm to 3mm.<\/p>\n
This tank will look fantastic on your mod, perform well, and last the test of time. ‘High-end’ atomizer at a reasonable cost.<\/p>\n
The Nautilus tank’s new design is very different from its predecessors; the dome-shaped top and cage style are no longer present, and Aspire has opted for a more conventional exposed tank design with a sliding top-fill cap. It is also larger, measuring 24 mm in diameter; however, due to TPD regulations, it can only hold 2 ml of e-liquid, while the straight glass version has a capacity of about 4.0 ml (non TPD version will also include a spare glass section).<\/p>\n
The Nautilus 3 tank coil housing has a clever internal valve that closes as you remove your coil and opens when you insert one, allowing you to change your coil while the tank is still filled with e-liquid. To change your coil, simply unscrew the base (the part with the airflow ring), pull out the old coil, and push in the new coil. Stripping the tank down is easy and all the screws come out counter-clockwise.<\/p>\n
Once everything is put back together, you can fill the tank via an excellent sliding top-fill. Simply slide from where the clear Red arrow is located to reveal the fill port, which is large enough for most bottles BUT the TPD version is a little trickier to fill as the extrusion on the TPD version is much smaller, limiting it to 2ml capacity. This will only go back on in one position as the base is wider to slip over the O-ring.<\/p>\n
internalTags:metax : nodesc : ppc0 : xnips : xnobodylinks : xline0012272022 : VSEX0012272022<\/p>\n\r\n