{"id":13984,"date":"2022-12-06T16:56:08","date_gmt":"2022-12-06T21:56:08","guid":{"rendered":"https:\/\/www.megavaper.com\/?post_type=product&p=13984"},"modified":"2024-08-26T12:38:08","modified_gmt":"2024-08-26T17:38:08","slug":"oxva-origin-se-pod-kit","status":"publish","type":"product","link":"https:\/\/www.megavaper.com\/product\/oxva-origin-se-pod-kit\/","title":{"rendered":"OXVA Origin SE Pod Kit | 1400mAh 40W 3.5mL"},"content":{"rendered":"
Press the firing button five times quickly to turn on the Origin SE. You can always select how you want to vape with the Origin SE since both auto-draw and manual draw are supported. Although auto-drawing is effective, you must draw forcefully to score a hit. By pressing the fire button, you may deliver a better, more powerful blow without needing to exert much force.<\/p>\n
If you wish to stop the OXVA Origin SE from firing, it also has a lock option. That may be turned on and off by pressing the firing button four times quickly.<\/p>\n
You may choose between the low, medium, and high power settings by rapidly pushing the firing button three times. The power levels work pretty well since there is a sufficient wattage variation between each one to make them truly visible.<\/p>\n
Your current mode is shown by the LEDs on the front panel. Three lights are high, medium, and low, respectively. Depending on the coil you select, each power level automatically adapts to a certain power output.<\/p>\n
The pod has a capacity of 3.5 ml, or 2 ml for TPD requirements. You may use a different tip here if you’d like since the rounded mouthpiece at the top is detachable and has a 510 tip. The liquid fill port employs a rubber seal and is located on the rear of the pod. To fill the pod, you must remove it from the apparatus.<\/p>\n
The coils used in the Origin SE are from OXVA’s Unicoil line. These are available in 0.3, 0.5, or 1.0 Ohm resistance.<\/p>\n
One of the best things about this pod system is the option to purchase an RBA Coil Deck.\u00a0 No need to waste money on coils. You can get your coil perfect by building it yourself.<\/p>\n
The airflow adjusting rings are incorporated into these coils. Although it is useful, airflow control is sometimes not very effective in other pod devices of a similar kind. Although it is a bit less convenient, having the airflow ring on the coil is significantly more effective.<\/p>\n
Furthermore, using it is actually not that difficult. Simply remove the pod and transfer it. The airflow ring also performs well. When the airflow is wide open, you get a lot of airflow for powerful strikes; when it’s just partially open, the draw is limited; and when it’s just a little open, you may get some decent tight-draw mouth-to-lung hits. The skill with which this does MTL and Lung Hits is amazing.<\/p>\n
Featuring one of the largest batteries that you can get on a pod system.<\/p>\n
The OXVA’s internal battery has a 1400mAh capacity. For a pod device, and particularly for a device this compact, it is a good-sized battery. You can charge it up to 80% in only 30 minutes using USB-C charging at 5 volts and 2 amps.<\/p>\n
Depending on the battery’s charge, the front panel’s LEDs show various colors. Green lights indicate a charge over 65%, blue lights between 30-65%, and red lights indicate a charge below 30%.<\/p>\n
It’s hard to beat the OXVA\u00a0 Origin SE as a pod system. It has outstanding flavor production, decent airflow control, basic changeable wattage settings, and it generally works extremely well overall. The coils are also excellent. These are excellent for chain vaping since they work quickly and consistently, with no dry hits or poor taste. The Origin SE’s plastic body may be a disadvantage, but it also makes it so light and has no effect on performance.<\/p>\n
<\/p>\n
metax : nodesc : ppc0 : xnips : xnobodylinks : xline0012062022 : VSEX0012062022<\/p>\n\r\n